barak/tarpoon
1
0
Fork 1
Code Issues Pull requests Releases Wiki Activity

Add glide.yaml and vendor deps

Browse source
This commit is contained in:
Dalton Hubble 2016-12-03 22:43:32 -08:00
parent db918f12ad
commit 5b3d5e81bd
18880 changed files with 5166045 additions and 1 deletions
Download patch file Download diff file Expand all files Collapse all files

188
vendor/gopkg.in/yaml.v2/LICENSE generated vendored Normal file
View file

@ -0,0 +1,188 @@
Copyright (c) 2011-2014 - Canonical Inc.
This software is licensed under the LGPLv3, included below.
As a special exception to the GNU Lesser General Public License version 3
("LGPL3"), the copyright holders of this Library give you permission to
convey to a third party a Combined Work that links statically or dynamically
to this Library without providing any Minimal Corresponding Source or
Minimal Application Code as set out in 4d or providing the installation
information set out in section 4e, provided that you comply with the other
provisions of LGPL3 and provided that you meet, for the Application the
terms and conditions of the license(s) which apply to the Application.
Except as stated in this special exception, the provisions of LGPL3 will
continue to comply in full to this Library. If you modify this Library, you
may apply this exception to your version of this Library, but you are not
obliged to do so. If you do not wish to do so, delete this exception
statement from your version. This exception does not (and cannot) modify any
license terms which apply to the Application, with which you must still
comply.
GNU LESSER GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
This version of the GNU Lesser General Public License incorporates
the terms and conditions of version 3 of the GNU General Public
License, supplemented by the additional permissions listed below.
0. Additional Definitions.
As used herein, "this License" refers to version 3 of the GNU Lesser
General Public License, and the "GNU GPL" refers to version 3 of the GNU
General Public License.
"The Library" refers to a covered work governed by this License,
other than an Application or a Combined Work as defined below.
An "Application" is any work that makes use of an interface provided
by the Library, but which is not otherwise based on the Library.
Defining a subclass of a class defined by the Library is deemed a mode
of using an interface provided by the Library.
A "Combined Work" is a work produced by combining or linking an
Application with the Library. The particular version of the Library
with which the Combined Work was made is also called the "Linked
Version".
The "Minimal Corresponding Source" for a Combined Work means the
Corresponding Source for the Combined Work, excluding any source code
for portions of the Combined Work that, considered in isolation, are
based on the Application, and not on the Linked Version.
The "Corresponding Application Code" for a Combined Work means the
object code and/or source code for the Application, including any data
and utility programs needed for reproducing the Combined Work from the
Application, but excluding the System Libraries of the Combined Work.
1. Exception to Section 3 of the GNU GPL.
You may convey a covered work under sections 3 and 4 of this License
without being bound by section 3 of the GNU GPL.
2. Conveying Modified Versions.
If you modify a copy of the Library, and, in your modifications, a
facility refers to a function or data to be supplied by an Application
that uses the facility (other than as an argument passed when the
facility is invoked), then you may convey a copy of the modified
version:
a) under this License, provided that you make a good faith effort to
ensure that, in the event an Application does not supply the
function or data, the facility still operates, and performs
whatever part of its purpose remains meaningful, or
b) under the GNU GPL, with none of the additional permissions of
this License applicable to that copy.
3. Object Code Incorporating Material from Library Header Files.
The object code form of an Application may incorporate material from
a header file that is part of the Library. You may convey such object
code under terms of your choice, provided that, if the incorporated
material is not limited to numerical parameters, data structure
layouts and accessors, or small macros, inline functions and templates
(ten or fewer lines in length), you do both of the following:
a) Give prominent notice with each copy of the object code that the
Library is used in it and that the Library and its use are
covered by this License.
b) Accompany the object code with a copy of the GNU GPL and this license
document.
4. Combined Works.
You may convey a Combined Work under terms of your choice that,
taken together, effectively do not restrict modification of the
portions of the Library contained in the Combined Work and reverse
engineering for debugging such modifications, if you also do each of
the following:
a) Give prominent notice with each copy of the Combined Work that
the Library is used in it and that the Library and its use are
covered by this License.
b) Accompany the Combined Work with a copy of the GNU GPL and this license
document.
c) For a Combined Work that displays copyright notices during
execution, include the copyright notice for the Library among
these notices, as well as a reference directing the user to the
copies of the GNU GPL and this license document.
d) Do one of the following:
0) Convey the Minimal Corresponding Source under the terms of this
License, and the Corresponding Application Code in a form
suitable for, and under terms that permit, the user to
recombine or relink the Application with a modified version of
the Linked Version to produce a modified Combined Work, in the
manner specified by section 6 of the GNU GPL for conveying
Corresponding Source.
1) Use a suitable shared library mechanism for linking with the
Library. A suitable mechanism is one that (a) uses at run time
a copy of the Library already present on the user's computer
system, and (b) will operate properly with a modified version
of the Library that is interface-compatible with the Linked
Version.
e) Provide Installation Information, but only if you would otherwise
be required to provide such information under section 6 of the
GNU GPL, and only to the extent that such information is
necessary to install and execute a modified version of the
Combined Work produced by recombining or relinking the
Application with a modified version of the Linked Version. (If
you use option 4d0, the Installation Information must accompany
the Minimal Corresponding Source and Corresponding Application
Code. If you use option 4d1, you must provide the Installation
Information in the manner specified by section 6 of the GNU GPL
for conveying Corresponding Source.)
5. Combined Libraries.
You may place library facilities that are a work based on the
Library side by side in a single library together with other library
facilities that are not Applications and are not covered by this
License, and convey such a combined library under terms of your
choice, if you do both of the following:
a) Accompany the combined library with a copy of the same work based
on the Library, uncombined with any other library facilities,
conveyed under the terms of this License.
b) Give prominent notice with the combined library that part of it
is a work based on the Library, and explaining where to find the
accompanying uncombined form of the same work.
6. Revised Versions of the GNU Lesser General Public License.
The Free Software Foundation may publish revised and/or new versions
of the GNU Lesser General Public License from time to time. Such new
versions will be similar in spirit to the present version, but may
differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the
Library as you received it specifies that a certain numbered version
of the GNU Lesser General Public License "or any later version"
applies to it, you have the option of following the terms and
conditions either of that published version or of any later version
published by the Free Software Foundation. If the Library as you
received it does not specify a version number of the GNU Lesser
General Public License, you may choose any version of the GNU Lesser
General Public License ever published by the Free Software Foundation.
If the Library as you received it specifies that a proxy can decide
whether future versions of the GNU Lesser General Public License shall
apply, that proxy's public statement of acceptance of any version is
permanent authorization for you to choose that version for the
Library.

31
vendor/gopkg.in/yaml.v2/LICENSE.libyaml generated vendored Normal file
View file

@ -0,0 +1,31 @@
The following files were ported to Go from C files of libyaml, and thus
are still covered by their original copyright and license:
apic.go
emitterc.go
parserc.go
readerc.go
scannerc.go
writerc.go
yamlh.go
yamlprivateh.go
Copyright (c) 2006 Kirill Simonov
Permission is hereby granted, free of charge, to any person obtaining a copy of
this software and associated documentation files (the "Software"), to deal in
the Software without restriction, including without limitation the rights to
use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
of the Software, and to permit persons to whom the Software is furnished to do
so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.

131
vendor/gopkg.in/yaml.v2/README.md generated vendored Normal file
View file

@ -0,0 +1,131 @@
# YAML support for the Go language
Introduction
------------
The yaml package enables Go programs to comfortably encode and decode YAML
values. It was developed within [Canonical](https://www.canonical.com) as
part of the [juju](https://juju.ubuntu.com) project, and is based on a
pure Go port of the well-known [libyaml](http://pyyaml.org/wiki/LibYAML)
C library to parse and generate YAML data quickly and reliably.
Compatibility
-------------
The yaml package supports most of YAML 1.1 and 1.2, including support for
anchors, tags, map merging, etc. Multi-document unmarshalling is not yet
implemented, and base-60 floats from YAML 1.1 are purposefully not
supported since they're a poor design and are gone in YAML 1.2.
Installation and usage
----------------------
The import path for the package is *gopkg.in/yaml.v2*.
To install it, run:
go get gopkg.in/yaml.v2
API documentation
-----------------
If opened in a browser, the import path itself leads to the API documentation:
* [https://gopkg.in/yaml.v2](https://gopkg.in/yaml.v2)
API stability
-------------
The package API for yaml v2 will remain stable as described in [gopkg.in](https://gopkg.in).
License
-------
The yaml package is licensed under the LGPL with an exception that allows it to be linked statically. Please see the LICENSE file for details.
Example
-------
```Go
package main
import (
"fmt"
"log"
"gopkg.in/yaml.v2"
)
var data = `
a: Easy!
b:
c: 2
d: [3, 4]
`
type T struct {
A string
B struct {
RenamedC int `yaml:"c"`
D []int `yaml:",flow"`
}
}
func main() {
t := T{}
err := yaml.Unmarshal([]byte(data), &t)
if err != nil {
log.Fatalf("error: %v", err)
}
fmt.Printf("--- t:\n%v\n\n", t)
d, err := yaml.Marshal(&t)
if err != nil {
log.Fatalf("error: %v", err)
}
fmt.Printf("--- t dump:\n%s\n\n", string(d))
m := make(map[interface{}]interface{})
err = yaml.Unmarshal([]byte(data), &m)
if err != nil {
log.Fatalf("error: %v", err)
}
fmt.Printf("--- m:\n%v\n\n", m)
d, err = yaml.Marshal(&m)
if err != nil {
log.Fatalf("error: %v", err)
}
fmt.Printf("--- m dump:\n%s\n\n", string(d))
}
```
This example will generate the following output:
```
--- t:
{Easy! {2 [3 4]}}
--- t dump:
a: Easy!
b:
c: 2
d: [3, 4]
--- m:
map[a:Easy! b:map[c:2 d:[3 4]]]
--- m dump:
a: Easy!
b:
c: 2
d:
- 3
- 4
```

742
vendor/gopkg.in/yaml.v2/apic.go generated vendored Normal file
View file

File diff suppressed because it is too large Load diff

683
vendor/gopkg.in/yaml.v2/decode.go generated vendored Normal file
View file

File diff suppressed because it is too large Load diff

988
vendor/gopkg.in/yaml.v2/decode_test.go generated vendored Normal file
View file

File diff suppressed because it is too large Load diff

1685
vendor/gopkg.in/yaml.v2/emitterc.go generated vendored Normal file
View file

File diff suppressed because it is too large Load diff

306
vendor/gopkg.in/yaml.v2/encode.go generated vendored Normal file
View file

@ -0,0 +1,306 @@
package yaml
import (
"encoding"
"fmt"
"reflect"
"regexp"
"sort"
"strconv"
"strings"
"time"
)
type encoder struct {
emitter yaml_emitter_t
event yaml_event_t
out []byte
flow bool
}
func newEncoder() (e *encoder) {
e = &encoder{}
e.must(yaml_emitter_initialize(&e.emitter))
yaml_emitter_set_output_string(&e.emitter, &e.out)
yaml_emitter_set_unicode(&e.emitter, true)
e.must(yaml_stream_start_event_initialize(&e.event, yaml_UTF8_ENCODING))
e.emit()
e.must(yaml_document_start_event_initialize(&e.event, nil, nil, true))
e.emit()
return e
}
func (e *encoder) finish() {
e.must(yaml_document_end_event_initialize(&e.event, true))
e.emit()
e.emitter.open_ended = false
e.must(yaml_stream_end_event_initialize(&e.event))
e.emit()
}
func (e *encoder) destroy() {
yaml_emitter_delete(&e.emitter)
}
func (e *encoder) emit() {
// This will internally delete the e.event value.
if !yaml_emitter_emit(&e.emitter, &e.event) && e.event.typ != yaml_DOCUMENT_END_EVENT && e.event.typ != yaml_STREAM_END_EVENT {
e.must(false)
}
}
func (e *encoder) must(ok bool) {
if !ok {
msg := e.emitter.problem
if msg == "" {
msg = "unknown problem generating YAML content"
}
failf("%s", msg)
}
}
func (e *encoder) marshal(tag string, in reflect.Value) {
if !in.IsValid() {
e.nilv()
return
}
iface := in.Interface()
if m, ok := iface.(Marshaler); ok {
v, err := m.MarshalYAML()
if err != nil {
fail(err)
}
if v == nil {
e.nilv()
return
}
in = reflect.ValueOf(v)
} else if m, ok := iface.(encoding.TextMarshaler); ok {
text, err := m.MarshalText()
if err != nil {
fail(err)
}
in = reflect.ValueOf(string(text))
}
switch in.Kind() {
case reflect.Interface:
if in.IsNil() {
e.nilv()
} else {
e.marshal(tag, in.Elem())
}
case reflect.Map:
e.mapv(tag, in)
case reflect.Ptr:
if in.IsNil() {
e.nilv()
} else {
e.marshal(tag, in.Elem())
}
case reflect.Struct:
e.structv(tag, in)
case reflect.Slice:
if in.Type().Elem() == mapItemType {
e.itemsv(tag, in)
} else {
e.slicev(tag, in)
}
case reflect.String:
e.stringv(tag, in)
case reflect.Int, reflect.Int8, reflect.Int16, reflect.Int32, reflect.Int64:
if in.Type() == durationType {
e.stringv(tag, reflect.ValueOf(iface.(time.Duration).String()))
} else {
e.intv(tag, in)
}
case reflect.Uint, reflect.Uint8, reflect.Uint16, reflect.Uint32, reflect.Uint64, reflect.Uintptr:
e.uintv(tag, in)
case reflect.Float32, reflect.Float64:
e.floatv(tag, in)
case reflect.Bool:
e.boolv(tag, in)
default:
panic("cannot marshal type: " + in.Type().String())
}
}
func (e *encoder) mapv(tag string, in reflect.Value) {
e.mappingv(tag, func() {
keys := keyList(in.MapKeys())
sort.Sort(keys)
for _, k := range keys {
e.marshal("", k)
e.marshal("", in.MapIndex(k))
}
})
}
func (e *encoder) itemsv(tag string, in reflect.Value) {
e.mappingv(tag, func() {
slice := in.Convert(reflect.TypeOf([]MapItem{})).Interface().([]MapItem)
for _, item := range slice {
e.marshal("", reflect.ValueOf(item.Key))
e.marshal("", reflect.ValueOf(item.Value))
}
})
}
func (e *encoder) structv(tag string, in reflect.Value) {
sinfo, err := getStructInfo(in.Type())
if err != nil {
panic(err)
}
e.mappingv(tag, func() {
for _, info := range sinfo.FieldsList {
var value reflect.Value
if info.Inline == nil {
value = in.Field(info.Num)
} else {
value = in.FieldByIndex(info.Inline)
}
if info.OmitEmpty && isZero(value) {
continue
}
e.marshal("", reflect.ValueOf(info.Key))
e.flow = info.Flow
e.marshal("", value)
}
if sinfo.InlineMap >= 0 {
m := in.Field(sinfo.InlineMap)
if m.Len() > 0 {
e.flow = false
keys := keyList(m.MapKeys())
sort.Sort(keys)
for _, k := range keys {
if _, found := sinfo.FieldsMap[k.String()]; found {
panic(fmt.Sprintf("Can't have key %q in inlined map; conflicts with struct field", k.String()))
}
e.marshal("", k)
e.flow = false
e.marshal("", m.MapIndex(k))
}
}
}
})
}
func (e *encoder) mappingv(tag string, f func()) {
implicit := tag == ""
style := yaml_BLOCK_MAPPING_STYLE
if e.flow {
e.flow = false
style = yaml_FLOW_MAPPING_STYLE
}
e.must(yaml_mapping_start_event_initialize(&e.event, nil, []byte(tag), implicit, style))
e.emit()
f()
e.must(yaml_mapping_end_event_initialize(&e.event))
e.emit()
}
func (e *encoder) slicev(tag string, in reflect.Value) {
implicit := tag == ""
style := yaml_BLOCK_SEQUENCE_STYLE
if e.flow {
e.flow = false
style = yaml_FLOW_SEQUENCE_STYLE
}
e.must(yaml_sequence_start_event_initialize(&e.event, nil, []byte(tag), implicit, style))
e.emit()
n := in.Len()
for i := 0; i < n; i++ {
e.marshal("", in.Index(i))
}
e.must(yaml_sequence_end_event_initialize(&e.event))
e.emit()
}
// isBase60 returns whether s is in base 60 notation as defined in YAML 1.1.
//
// The base 60 float notation in YAML 1.1 is a terrible idea and is unsupported
// in YAML 1.2 and by this package, but these should be marshalled quoted for
// the time being for compatibility with other parsers.
func isBase60Float(s string) (result bool) {
// Fast path.
if s == "" {
return false
}
c := s[0]
if !(c == '+' || c == '-' || c >= '0' && c <= '9') || strings.IndexByte(s, ':') < 0 {
return false
}
// Do the full match.
return base60float.MatchString(s)
}
// From http://yaml.org/type/float.html, except the regular expression there
// is bogus. In practice parsers do not enforce the "\.[0-9_]*" suffix.
var base60float = regexp.MustCompile(`^[-+]?[0-9][0-9_]*(?::[0-5]?[0-9])+(?:\.[0-9_]*)?$`)
func (e *encoder) stringv(tag string, in reflect.Value) {
var style yaml_scalar_style_t
s := in.String()
rtag, rs := resolve("", s)
if rtag == yaml_BINARY_TAG {
if tag == "" || tag == yaml_STR_TAG {
tag = rtag
s = rs.(string)
} else if tag == yaml_BINARY_TAG {
failf("explicitly tagged !!binary data must be base64-encoded")
} else {
failf("cannot marshal invalid UTF-8 data as %s", shortTag(tag))
}
}
if tag == "" && (rtag != yaml_STR_TAG || isBase60Float(s)) {
style = yaml_DOUBLE_QUOTED_SCALAR_STYLE
} else if strings.Contains(s, "\n") {
style = yaml_LITERAL_SCALAR_STYLE
} else {
style = yaml_PLAIN_SCALAR_STYLE
}
e.emitScalar(s, "", tag, style)
}
func (e *encoder) boolv(tag string, in reflect.Value) {
var s string
if in.Bool() {
s = "true"
} else {
s = "false"
}
e.emitScalar(s, "", tag, yaml_PLAIN_SCALAR_STYLE)
}
func (e *encoder) intv(tag string, in reflect.Value) {
s := strconv.FormatInt(in.Int(), 10)
e.emitScalar(s, "", tag, yaml_PLAIN_SCALAR_STYLE)
}
func (e *encoder) uintv(tag string, in reflect.Value) {
s := strconv.FormatUint(in.Uint(), 10)
e.emitScalar(s, "", tag, yaml_PLAIN_SCALAR_STYLE)
}
func (e *encoder) floatv(tag string, in reflect.Value) {
// FIXME: Handle 64 bits here.
s := strconv.FormatFloat(float64(in.Float()), 'g', -1, 32)
switch s {
case "+Inf":
s = ".inf"
case "-Inf":
s = "-.inf"
case "NaN":
s = ".nan"
}
e.emitScalar(s, "", tag, yaml_PLAIN_SCALAR_STYLE)
}
func (e *encoder) nilv() {
e.emitScalar("null", "", "", yaml_PLAIN_SCALAR_STYLE)
}
func (e *encoder) emitScalar(value, anchor, tag string, style yaml_scalar_style_t) {
implicit := tag == ""
e.must(yaml_scalar_event_initialize(&e.event, []byte(anchor), []byte(tag), []byte(value), implicit, implicit, style))
e.emit()
}

501
vendor/gopkg.in/yaml.v2/encode_test.go generated vendored Normal file
View file

File diff suppressed because it is too large Load diff

1096
vendor/gopkg.in/yaml.v2/parserc.go generated vendored Normal file
View file

File diff suppressed because it is too large Load diff

394
vendor/gopkg.in/yaml.v2/readerc.go generated vendored Normal file
View file

@ -0,0 +1,394 @@
package yaml
import (
"io"
)
// Set the reader error and return 0.
func yaml_parser_set_reader_error(parser *yaml_parser_t, problem string, offset int, value int) bool {
parser.error = yaml_READER_ERROR
parser.problem = problem
parser.problem_offset = offset
parser.problem_value = value
return false
}
// Byte order marks.
const (
bom_UTF8 = "\xef\xbb\xbf"
bom_UTF16LE = "\xff\xfe"
bom_UTF16BE = "\xfe\xff"
)
// Determine the input stream encoding by checking the BOM symbol. If no BOM is
// found, the UTF-8 encoding is assumed. Return 1 on success, 0 on failure.
func yaml_parser_determine_encoding(parser *yaml_parser_t) bool {
// Ensure that we had enough bytes in the raw buffer.
for !parser.eof && len(parser.raw_buffer)-parser.raw_buffer_pos < 3 {
if !yaml_parser_update_raw_buffer(parser) {
return false
}
}
// Determine the encoding.
buf := parser.raw_buffer
pos := parser.raw_buffer_pos
avail := len(buf) - pos
if avail >= 2 && buf[pos] == bom_UTF16LE[0] && buf[pos+1] == bom_UTF16LE[1] {
parser.encoding = yaml_UTF16LE_ENCODING
parser.raw_buffer_pos += 2
parser.offset += 2
} else if avail >= 2 && buf[pos] == bom_UTF16BE[0] && buf[pos+1] == bom_UTF16BE[1] {
parser.encoding = yaml_UTF16BE_ENCODING
parser.raw_buffer_pos += 2
parser.offset += 2
} else if avail >= 3 && buf[pos] == bom_UTF8[0] && buf[pos+1] == bom_UTF8[1] && buf[pos+2] == bom_UTF8[2] {
parser.encoding = yaml_UTF8_ENCODING
parser.raw_buffer_pos += 3
parser.offset += 3
} else {
parser.encoding = yaml_UTF8_ENCODING
}
return true
}
// Update the raw buffer.
func yaml_parser_update_raw_buffer(parser *yaml_parser_t) bool {
size_read := 0
// Return if the raw buffer is full.
if parser.raw_buffer_pos == 0 && len(parser.raw_buffer) == cap(parser.raw_buffer) {
return true
}
// Return on EOF.
if parser.eof {
return true
}
// Move the remaining bytes in the raw buffer to the beginning.
if parser.raw_buffer_pos > 0 && parser.raw_buffer_pos < len(parser.raw_buffer) {
copy(parser.raw_buffer, parser.raw_buffer[parser.raw_buffer_pos:])
}
parser.raw_buffer = parser.raw_buffer[:len(parser.raw_buffer)-parser.raw_buffer_pos]
parser.raw_buffer_pos = 0
// Call the read handler to fill the buffer.
size_read, err := parser.read_handler(parser, parser.raw_buffer[len(parser.raw_buffer):cap(parser.raw_buffer)])
parser.raw_buffer = parser.raw_buffer[:len(parser.raw_buffer)+size_read]
if err == io.EOF {
parser.eof = true
} else if err != nil {
return yaml_parser_set_reader_error(parser, "input error: "+err.Error(), parser.offset, -1)
}
return true
}
// Ensure that the buffer contains at least `length` characters.
// Return true on success, false on failure.
//
// The length is supposed to be significantly less that the buffer size.
func yaml_parser_update_buffer(parser *yaml_parser_t, length int) bool {
if parser.read_handler == nil {
panic("read handler must be set")
}
// If the EOF flag is set and the raw buffer is empty, do nothing.
if parser.eof && parser.raw_buffer_pos == len(parser.raw_buffer) {
return true
}
// Return if the buffer contains enough characters.
if parser.unread >= length {
return true
}
// Determine the input encoding if it is not known yet.
if parser.encoding == yaml_ANY_ENCODING {
if !yaml_parser_determine_encoding(parser) {
return false
}
}
// Move the unread characters to the beginning of the buffer.
buffer_len := len(parser.buffer)
if parser.buffer_pos > 0 && parser.buffer_pos < buffer_len {
copy(parser.buffer, parser.buffer[parser.buffer_pos:])
buffer_len -= parser.buffer_pos
parser.buffer_pos = 0
} else if parser.buffer_pos == buffer_len {
buffer_len = 0
parser.buffer_pos = 0
}
// Open the whole buffer for writing, and cut it before returning.
parser.buffer = parser.buffer[:cap(parser.buffer)]
// Fill the buffer until it has enough characters.
first := true
for parser.unread < length {
// Fill the raw buffer if necessary.
if !first || parser.raw_buffer_pos == len(parser.raw_buffer) {
if !yaml_parser_update_raw_buffer(parser) {
parser.buffer = parser.buffer[:buffer_len]
return false
}
}
first = false
// Decode the raw buffer.
inner:
for parser.raw_buffer_pos != len(parser.raw_buffer) {
var value rune
var width int
raw_unread := len(parser.raw_buffer) - parser.raw_buffer_pos
// Decode the next character.
switch parser.encoding {
case yaml_UTF8_ENCODING:
// Decode a UTF-8 character. Check RFC 3629
// (http://www.ietf.org/rfc/rfc3629.txt) for more details.
//
// The following table (taken from the RFC) is used for
// decoding.
//
// Char. number range | UTF-8 octet sequence
// (hexadecimal) | (binary)
// --------------------+------------------------------------
// 0000 0000-0000 007F | 0xxxxxxx
// 0000 0080-0000 07FF | 110xxxxx 10xxxxxx
// 0000 0800-0000 FFFF | 1110xxxx 10xxxxxx 10xxxxxx
// 0001 0000-0010 FFFF | 11110xxx 10xxxxxx 10xxxxxx 10xxxxxx
//
// Additionally, the characters in the range 0xD800-0xDFFF
// are prohibited as they are reserved for use with UTF-16
// surrogate pairs.
// Determine the length of the UTF-8 sequence.
octet := parser.raw_buffer[parser.raw_buffer_pos]
switch {
case octet&0x80 == 0x00:
width = 1
case octet&0xE0 == 0xC0:
width = 2
case octet&0xF0 == 0xE0:
width = 3
case octet&0xF8 == 0xF0:
width = 4
default:
// The leading octet is invalid.
return yaml_parser_set_reader_error(parser,
"invalid leading UTF-8 octet",
parser.offset, int(octet))
}
// Check if the raw buffer contains an incomplete character.
if width > raw_unread {
if parser.eof {
return yaml_parser_set_reader_error(parser,
"incomplete UTF-8 octet sequence",
parser.offset, -1)
}
break inner
}
// Decode the leading octet.
switch {
case octet&0x80 == 0x00:
value = rune(octet & 0x7F)
case octet&0xE0 == 0xC0:
value = rune(octet & 0x1F)
case octet&0xF0 == 0xE0:
value = rune(octet & 0x0F)
case octet&0xF8 == 0xF0:
value = rune(octet & 0x07)
default:
value = 0
}
// Check and decode the trailing octets.
for k := 1; k < width; k++ {
octet = parser.raw_buffer[parser.raw_buffer_pos+k]
// Check if the octet is valid.
if (octet & 0xC0) != 0x80 {
return yaml_parser_set_reader_error(parser,
"invalid trailing UTF-8 octet",
parser.offset+k, int(octet))
}
// Decode the octet.
value = (value << 6) + rune(octet&0x3F)
}
// Check the length of the sequence against the value.
switch {
case width == 1:
case width == 2 && value >= 0x80:
case width == 3 && value >= 0x800:
case width == 4 && value >= 0x10000:
default:
return yaml_parser_set_reader_error(parser,
"invalid length of a UTF-8 sequence",
parser.offset, -1)
}
// Check the range of the value.
if value >= 0xD800 && value <= 0xDFFF || value > 0x10FFFF {
return yaml_parser_set_reader_error(parser,
"invalid Unicode character",
parser.offset, int(value))
}
case yaml_UTF16LE_ENCODING, yaml_UTF16BE_ENCODING:
var low, high int
if parser.encoding == yaml_UTF16LE_ENCODING {
low, high = 0, 1
} else {
low, high = 1, 0
}
// The UTF-16 encoding is not as simple as one might
// naively think. Check RFC 2781
// (http://www.ietf.org/rfc/rfc2781.txt).
//
// Normally, two subsequent bytes describe a Unicode
// character. However a special technique (called a
// surrogate pair) is used for specifying character
// values larger than 0xFFFF.
//
// A surrogate pair consists of two pseudo-characters:
// high surrogate area (0xD800-0xDBFF)
// low surrogate area (0xDC00-0xDFFF)
//
// The following formulas are used for decoding
// and encoding characters using surrogate pairs:
//
// U = U' + 0x10000 (0x01 00 00 <= U <= 0x10 FF FF)
// U' = yyyyyyyyyyxxxxxxxxxx (0 <= U' <= 0x0F FF FF)
// W1 = 110110yyyyyyyyyy
// W2 = 110111xxxxxxxxxx
//
// where U is the character value, W1 is the high surrogate
// area, W2 is the low surrogate area.
// Check for incomplete UTF-16 character.
if raw_unread < 2 {
if parser.eof {
return yaml_parser_set_reader_error(parser,
"incomplete UTF-16 character",
parser.offset, -1)
}
break inner
}
// Get the character.
value = rune(parser.raw_buffer[parser.raw_buffer_pos+low]) +
(rune(parser.raw_buffer[parser.raw_buffer_pos+high]) << 8)
// Check for unexpected low surrogate area.
if value&0xFC00 == 0xDC00 {
return yaml_parser_set_reader_error(parser,
"unexpected low surrogate area",
parser.offset, int(value))
}
// Check for a high surrogate area.
if value&0xFC00 == 0xD800 {
width = 4
// Check for incomplete surrogate pair.
if raw_unread < 4 {
if parser.eof {
return yaml_parser_set_reader_error(parser,
"incomplete UTF-16 surrogate pair",
parser.offset, -1)
}
break inner
}
// Get the next character.
value2 := rune(parser.raw_buffer[parser.raw_buffer_pos+low+2]) +
(rune(parser.raw_buffer[parser.raw_buffer_pos+high+2]) << 8)
// Check for a low surrogate area.
if value2&0xFC00 != 0xDC00 {
return yaml_parser_set_reader_error(parser,
"expected low surrogate area",
parser.offset+2, int(value2))
}
// Generate the value of the surrogate pair.
value = 0x10000 + ((value & 0x3FF) << 10) + (value2 & 0x3FF)
} else {
width = 2
}
default:
panic("impossible")
}
// Check if the character is in the allowed range:
// #x9 | #xA | #xD | [#x20-#x7E] (8 bit)
// | #x85 | [#xA0-#xD7FF] | [#xE000-#xFFFD] (16 bit)
// | [#x10000-#x10FFFF] (32 bit)
switch {
case value == 0x09:
case value == 0x0A:
case value == 0x0D:
case value >= 0x20 && value <= 0x7E:
case value == 0x85:
case value >= 0xA0 && value <= 0xD7FF:
case value >= 0xE000 && value <= 0xFFFD:
case value >= 0x10000 && value <= 0x10FFFF:
default:
return yaml_parser_set_reader_error(parser,
"control characters are not allowed",
parser.offset, int(value))
}
// Move the raw pointers.
parser.raw_buffer_pos += width
parser.offset += width
// Finally put the character into the buffer.
if value <= 0x7F {
// 0000 0000-0000 007F . 0xxxxxxx
parser.buffer[buffer_len+0] = byte(value)
buffer_len += 1
} else if value <= 0x7FF {
// 0000 0080-0000 07FF . 110xxxxx 10xxxxxx
parser.buffer[buffer_len+0] = byte(0xC0 + (value >> 6))
parser.buffer[buffer_len+1] = byte(0x80 + (value & 0x3F))
buffer_len += 2
} else if value <= 0xFFFF {
// 0000 0800-0000 FFFF . 1110xxxx 10xxxxxx 10xxxxxx
parser.buffer[buffer_len+0] = byte(0xE0 + (value >> 12))
parser.buffer[buffer_len+1] = byte(0x80 + ((value >> 6) & 0x3F))
parser.buffer[buffer_len+2] = byte(0x80 + (value & 0x3F))
buffer_len += 3
} else {
// 0001 0000-0010 FFFF . 11110xxx 10xxxxxx 10xxxxxx 10xxxxxx
parser.buffer[buffer_len+0] = byte(0xF0 + (value >> 18))
parser.buffer[buffer_len+1] = byte(0x80 + ((value >> 12) & 0x3F))
parser.buffer[buffer_len+2] = byte(0x80 + ((value >> 6) & 0x3F))
parser.buffer[buffer_len+3] = byte(0x80 + (value & 0x3F))
buffer_len += 4
}
parser.unread++
}
// On EOF, put NUL into the buffer and return.
if parser.eof {
parser.buffer[buffer_len] = 0
buffer_len++
parser.unread++
break
}
}
parser.buffer = parser.buffer[:buffer_len]
return true
}

203
vendor/gopkg.in/yaml.v2/resolve.go generated vendored Normal file
View file

@ -0,0 +1,203 @@
package yaml
import (
"encoding/base64"
"math"
"strconv"
"strings"
"unicode/utf8"
)
type resolveMapItem struct {
value interface{}
tag string
}
var resolveTable = make([]byte, 256)
var resolveMap = make(map[string]resolveMapItem)
func init() {
t := resolveTable
t[int('+')] = 'S' // Sign
t[int('-')] = 'S'
for _, c := range "0123456789" {
t[int(c)] = 'D' // Digit
}
for _, c := range "yYnNtTfFoO~" {
t[int(c)] = 'M' // In map
}
t[int('.')] = '.' // Float (potentially in map)
var resolveMapList = []struct {
v interface{}
tag string
l []string
}{
{true, yaml_BOOL_TAG, []string{"y", "Y", "yes", "Yes", "YES"}},
{true, yaml_BOOL_TAG, []string{"true", "True", "TRUE"}},
{true, yaml_BOOL_TAG, []string{"on", "On", "ON"}},
{false, yaml_BOOL_TAG, []string{"n", "N", "no", "No", "NO"}},
{false, yaml_BOOL_TAG, []string{"false", "False", "FALSE"}},
{false, yaml_BOOL_TAG, []string{"off", "Off", "OFF"}},
{nil, yaml_NULL_TAG, []string{"", "~", "null", "Null", "NULL"}},
{math.NaN(), yaml_FLOAT_TAG, []string{".nan", ".NaN", ".NAN"}},
{math.Inf(+1), yaml_FLOAT_TAG, []string{".inf", ".Inf", ".INF"}},
{math.Inf(+1), yaml_FLOAT_TAG, []string{"+.inf", "+.Inf", "+.INF"}},
{math.Inf(-1), yaml_FLOAT_TAG, []string{"-.inf", "-.Inf", "-.INF"}},
{"<<", yaml_MERGE_TAG, []string{"<<"}},
}
m := resolveMap
for _, item := range resolveMapList {
for _, s := range item.l {
m[s] = resolveMapItem{item.v, item.tag}
}
}
}
const longTagPrefix = "tag:yaml.org,2002:"
func shortTag(tag string) string {
// TODO This can easily be made faster and produce less garbage.
if strings.HasPrefix(tag, longTagPrefix) {
return "!!" + tag[len(longTagPrefix):]
}
return tag
}
func longTag(tag string) string {
if strings.HasPrefix(tag, "!!") {
return longTagPrefix + tag[2:]
}
return tag
}
func resolvableTag(tag string) bool {
switch tag {
case "", yaml_STR_TAG, yaml_BOOL_TAG, yaml_INT_TAG, yaml_FLOAT_TAG, yaml_NULL_TAG:
return true
}
return false
}
func resolve(tag string, in string) (rtag string, out interface{}) {
if !resolvableTag(tag) {
return tag, in
}
defer func() {
switch tag {
case "", rtag, yaml_STR_TAG, yaml_BINARY_TAG:
return
}
failf("cannot decode %s `%s` as a %s", shortTag(rtag), in, shortTag(tag))
}()
// Any data is accepted as a !!str or !!binary.
// Otherwise, the prefix is enough of a hint about what it might be.
hint := byte('N')
if in != "" {
hint = resolveTable[in[0]]
}
if hint != 0 && tag != yaml_STR_TAG && tag != yaml_BINARY_TAG {
// Handle things we can lookup in a map.
if item, ok := resolveMap[in]; ok {
return item.tag, item.value
}
// Base 60 floats are a bad idea, were dropped in YAML 1.2, and
// are purposefully unsupported here. They're still quoted on
// the way out for compatibility with other parser, though.
switch hint {
case 'M':
// We've already checked the map above.
case '.':
// Not in the map, so maybe a normal float.
floatv, err := strconv.ParseFloat(in, 64)
if err == nil {
return yaml_FLOAT_TAG, floatv
}
case 'D', 'S':
// Int, float, or timestamp.
plain := strings.Replace(in, "_", "", -1)
intv, err := strconv.ParseInt(plain, 0, 64)
if err == nil {
if intv == int64(int(intv)) {
return yaml_INT_TAG, int(intv)
} else {
return yaml_INT_TAG, intv
}
}
uintv, err := strconv.ParseUint(plain, 0, 64)
if err == nil {
return yaml_INT_TAG, uintv
}
floatv, err := strconv.ParseFloat(plain, 64)
if err == nil {
return yaml_FLOAT_TAG, floatv
}
if strings.HasPrefix(plain, "0b") {
intv, err := strconv.ParseInt(plain[2:], 2, 64)
if err == nil {
if intv == int64(int(intv)) {
return yaml_INT_TAG, int(intv)
} else {
return yaml_INT_TAG, intv
}
}
uintv, err := strconv.ParseUint(plain[2:], 2, 64)
if err == nil {
return yaml_INT_TAG, uintv
}
} else if strings.HasPrefix(plain, "-0b") {
intv, err := strconv.ParseInt(plain[3:], 2, 64)
if err == nil {
if intv == int64(int(intv)) {
return yaml_INT_TAG, -int(intv)
} else {
return yaml_INT_TAG, -intv
}
}
}
// XXX Handle timestamps here.
default:
panic("resolveTable item not yet handled: " + string(rune(hint)) + " (with " + in + ")")
}
}
if tag == yaml_BINARY_TAG {
return yaml_BINARY_TAG, in
}
if utf8.ValidString(in) {
return yaml_STR_TAG, in
}
return yaml_BINARY_TAG, encodeBase64(in)
}
// encodeBase64 encodes s as base64 that is broken up into multiple lines
// as appropriate for the resulting length.
func encodeBase64(s string) string {
const lineLen = 70
encLen := base64.StdEncoding.EncodedLen(len(s))
lines := encLen/lineLen + 1
buf := make([]byte, encLen*2+lines)
in := buf[0:encLen]
out := buf[encLen:]
base64.StdEncoding.Encode(in, []byte(s))
k := 0
for i := 0; i < len(in); i += lineLen {
j := i + lineLen
if j > len(in) {
j = len(in)
}
k += copy(out[k:], in[i:j])
if lines > 1 {
out[k] = '\n'
k++
}
}
return string(out[:k])
}

2710
vendor/gopkg.in/yaml.v2/scannerc.go generated vendored Normal file
View file

File diff suppressed because it is too large Load diff

104
vendor/gopkg.in/yaml.v2/sorter.go generated vendored Normal file
View file

@ -0,0 +1,104 @@
package yaml
import (
"reflect"
"unicode"
)
type keyList []reflect.Value
func (l keyList) Len() int { return len(l) }
func (l keyList) Swap(i, j int) { l[i], l[j] = l[j], l[i] }
func (l keyList) Less(i, j int) bool {
a := l[i]
b := l[j]
ak := a.Kind()
bk := b.Kind()
for (ak == reflect.Interface || ak == reflect.Ptr) && !a.IsNil() {
a = a.Elem()
ak = a.Kind()
}
for (bk == reflect.Interface || bk == reflect.Ptr) && !b.IsNil() {
b = b.Elem()
bk = b.Kind()
}
af, aok := keyFloat(a)
bf, bok := keyFloat(b)
if aok && bok {
if af != bf {
return af < bf
}
if ak != bk {
return ak < bk
}
return numLess(a, b)
}
if ak != reflect.String || bk != reflect.String {
return ak < bk
}
ar, br := []rune(a.String()), []rune(b.String())
for i := 0; i < len(ar) && i < len(br); i++ {
if ar[i] == br[i] {
continue
}
al := unicode.IsLetter(ar[i])
bl := unicode.IsLetter(br[i])
if al && bl {
return ar[i] < br[i]
}
if al || bl {
return bl
}
var ai, bi int
var an, bn int64
for ai = i; ai < len(ar) && unicode.IsDigit(ar[ai]); ai++ {
an = an*10 + int64(ar[ai]-'0')
}
for bi = i; bi < len(br) && unicode.IsDigit(br[bi]); bi++ {
bn = bn*10 + int64(br[bi]-'0')
}
if an != bn {
return an < bn
}
if ai != bi {
return ai < bi
}
return ar[i] < br[i]
}
return len(ar) < len(br)
}
// keyFloat returns a float value for v if it is a number/bool
// and whether it is a number/bool or not.
func keyFloat(v reflect.Value) (f float64, ok bool) {
switch v.Kind() {
case reflect.Int, reflect.Int8, reflect.Int16, reflect.Int32, reflect.Int64:
return float64(v.Int()), true
case reflect.Float32, reflect.Float64:
return v.Float(), true
case reflect.Uint, reflect.Uint8, reflect.Uint16, reflect.Uint32, reflect.Uint64, reflect.Uintptr:
return float64(v.Uint()), true
case reflect.Bool:
if v.Bool() {
return 1, true
}
return 0, true
}
return 0, false
}
// numLess returns whether a < b.
// a and b must necessarily have the same kind.
func numLess(a, b reflect.Value) bool {
switch a.Kind() {
case reflect.Int, reflect.Int8, reflect.Int16, reflect.Int32, reflect.Int64:
return a.Int() < b.Int()
case reflect.Float32, reflect.Float64:
return a.Float() < b.Float()
case reflect.Uint, reflect.Uint8, reflect.Uint16, reflect.Uint32, reflect.Uint64, reflect.Uintptr:
return a.Uint() < b.Uint()
case reflect.Bool:
return !a.Bool() && b.Bool()
}
panic("not a number")
}

12
vendor/gopkg.in/yaml.v2/suite_test.go generated vendored Normal file
View file

@ -0,0 +1,12 @@
package yaml_test
import (
. "gopkg.in/check.v1"
"testing"
)
func Test(t *testing.T) { TestingT(t) }
type S struct{}
var _ = Suite(&S{})

89
vendor/gopkg.in/yaml.v2/writerc.go generated vendored Normal file
View file

@ -0,0 +1,89 @@
package yaml
// Set the writer error and return false.
func yaml_emitter_set_writer_error(emitter *yaml_emitter_t, problem string) bool {
emitter.error = yaml_WRITER_ERROR
emitter.problem = problem
return false
}
// Flush the output buffer.
func yaml_emitter_flush(emitter *yaml_emitter_t) bool {
if emitter.write_handler == nil {
panic("write handler not set")
}
// Check if the buffer is empty.
if emitter.buffer_pos == 0 {
return true
}
// If the output encoding is UTF-8, we don't need to recode the buffer.
if emitter.encoding == yaml_UTF8_ENCODING {
if err := emitter.write_handler(emitter, emitter.buffer[:emitter.buffer_pos]); err != nil {
return yaml_emitter_set_writer_error(emitter, "write error: "+err.Error())
}
emitter.buffer_pos = 0
return true
}
// Recode the buffer into the raw buffer.
var low, high int
if emitter.encoding == yaml_UTF16LE_ENCODING {
low, high = 0, 1
} else {
high, low = 1, 0
}
pos := 0
for pos < emitter.buffer_pos {
// See the "reader.c" code for more details on UTF-8 encoding. Note
// that we assume that the buffer contains a valid UTF-8 sequence.
// Read the next UTF-8 character.
octet := emitter.buffer[pos]
var w int
var value rune
switch {
case octet&0x80 == 0x00:
w, value = 1, rune(octet&0x7F)
case octet&0xE0 == 0xC0:
w, value = 2, rune(octet&0x1F)
case octet&0xF0 == 0xE0:
w, value = 3, rune(octet&0x0F)
case octet&0xF8 == 0xF0:
w, value = 4, rune(octet&0x07)
}
for k := 1; k < w; k++ {
octet = emitter.buffer[pos+k]
value = (value << 6) + (rune(octet) & 0x3F)
}
pos += w
// Write the character.
if value < 0x10000 {
var b [2]byte
b[high] = byte(value >> 8)
b[low] = byte(value & 0xFF)
emitter.raw_buffer = append(emitter.raw_buffer, b[0], b[1])
} else {
// Write the character using a surrogate pair (check "reader.c").
var b [4]byte
value -= 0x10000
b[high] = byte(0xD8 + (value >> 18))
b[low] = byte((value >> 10) & 0xFF)
b[high+2] = byte(0xDC + ((value >> 8) & 0xFF))
b[low+2] = byte(value & 0xFF)
emitter.raw_buffer = append(emitter.raw_buffer, b[0], b[1], b[2], b[3])
}
}
// Write the raw buffer.
if err := emitter.write_handler(emitter, emitter.raw_buffer); err != nil {
return yaml_emitter_set_writer_error(emitter, "write error: "+err.Error())
}
emitter.buffer_pos = 0
emitter.raw_buffer = emitter.raw_buffer[:0]
return true
}

346
vendor/gopkg.in/yaml.v2/yaml.go generated vendored Normal file
View file

@ -0,0 +1,346 @@
// Package yaml implements YAML support for the Go language.
//
// Source code and other details for the project are available at GitHub:
//
// https://github.com/go-yaml/yaml
//
package yaml
import (
"errors"
"fmt"
"reflect"
"strings"
"sync"
)
// MapSlice encodes and decodes as a YAML map.
// The order of keys is preserved when encoding and decoding.
type MapSlice []MapItem
// MapItem is an item in a MapSlice.
type MapItem struct {
Key, Value interface{}
}
// The Unmarshaler interface may be implemented by types to customize their
// behavior when being unmarshaled from a YAML document. The UnmarshalYAML
// method receives a function that may be called to unmarshal the original
// YAML value into a field or variable. It is safe to call the unmarshal
// function parameter more than once if necessary.
type Unmarshaler interface {
UnmarshalYAML(unmarshal func(interface{}) error) error
}
// The Marshaler interface may be implemented by types to customize their
// behavior when being marshaled into a YAML document. The returned value
// is marshaled in place of the original value implementing Marshaler.
//
// If an error is returned by MarshalYAML, the marshaling procedure stops
// and returns with the provided error.
type Marshaler interface {
MarshalYAML() (interface{}, error)
}
// Unmarshal decodes the first document found within the in byte slice
// and assigns decoded values into the out value.
//
// Maps and pointers (to a struct, string, int, etc) are accepted as out
// values. If an internal pointer within a struct is not initialized,
// the yaml package will initialize it if necessary for unmarshalling
// the provided data. The out parameter must not be nil.
//
// The type of the decoded values should be compatible with the respective
// values in out. If one or more values cannot be decoded due to a type
// mismatches, decoding continues partially until the end of the YAML
// content, and a *yaml.TypeError is returned with details for all
// missed values.
//
// Struct fields are only unmarshalled if they are exported (have an
// upper case first letter), and are unmarshalled using the field name
// lowercased as the default key. Custom keys may be defined via the
// "yaml" name in the field tag: the content preceding the first comma
// is used as the key, and the following comma-separated options are
// used to tweak the marshalling process (see Marshal).
// Conflicting names result in a runtime error.
//
// For example:
//
// type T struct {
// F int `yaml:"a,omitempty"`
// B int
// }
// var t T
// yaml.Unmarshal([]byte("a: 1\nb: 2"), &t)
//
// See the documentation of Marshal for the format of tags and a list of
// supported tag options.
//
func Unmarshal(in []byte, out interface{}) (err error) {
defer handleErr(&err)
d := newDecoder()
p := newParser(in)
defer p.destroy()
node := p.parse()
if node != nil {
v := reflect.ValueOf(out)
if v.Kind() == reflect.Ptr && !v.IsNil() {
v = v.Elem()
}
d.unmarshal(node, v)
}
if len(d.terrors) > 0 {
return &TypeError{d.terrors}
}
return nil
}
// Marshal serializes the value provided into a YAML document. The structure
// of the generated document will reflect the structure of the value itself.
// Maps and pointers (to struct, string, int, etc) are accepted as the in value.
//
// Struct fields are only unmarshalled if they are exported (have an upper case
// first letter), and are unmarshalled using the field name lowercased as the
// default key. Custom keys may be defined via the "yaml" name in the field
// tag: the content preceding the first comma is used as the key, and the
// following comma-separated options are used to tweak the marshalling process.
// Conflicting names result in a runtime error.
//
// The field tag format accepted is:
//
// `(...) yaml:"[<key>][,<flag1>[,<flag2>]]" (...)`
//
// The following flags are currently supported:
//
// omitempty Only include the field if it's not set to the zero
// value for the type or to empty slices or maps.
// Does not apply to zero valued structs.
//
// flow Marshal using a flow style (useful for structs,
// sequences and maps).
//
// inline Inline the field, which must be a struct or a map,
// causing all of its fields or keys to be processed as if
// they were part of the outer struct. For maps, keys must
// not conflict with the yaml keys of other struct fields.
//
// In addition, if the key is "-", the field is ignored.
//
// For example:
//
// type T struct {
// F int "a,omitempty"
// B int
// }
// yaml.Marshal(&T{B: 2}) // Returns "b: 2\n"
// yaml.Marshal(&T{F: 1}} // Returns "a: 1\nb: 0\n"
//
func Marshal(in interface{}) (out []byte, err error) {
defer handleErr(&err)
e := newEncoder()
defer e.destroy()
e.marshal("", reflect.ValueOf(in))
e.finish()
out = e.out
return
}
func handleErr(err *error) {
if v := recover(); v != nil {
if e, ok := v.(yamlError); ok {
*err = e.err
} else {
panic(v)
}
}
}
type yamlError struct {
err error
}
func fail(err error) {
panic(yamlError{err})
}
func failf(format string, args ...interface{}) {
panic(yamlError{fmt.Errorf("yaml: "+format, args...)})
}
// A TypeError is returned by Unmarshal when one or more fields in
// the YAML document cannot be properly decoded into the requested
// types. When this error is returned, the value is still
// unmarshaled partially.
type TypeError struct {
Errors []string
}
func (e *TypeError) Error() string {
return fmt.Sprintf("yaml: unmarshal errors:\n %s", strings.Join(e.Errors, "\n "))
}
// --------------------------------------------------------------------------
// Maintain a mapping of keys to structure field indexes
// The code in this section was copied from mgo/bson.
// structInfo holds details for the serialization of fields of
// a given struct.
type structInfo struct {
FieldsMap map[string]fieldInfo
FieldsList []fieldInfo
// InlineMap is the number of the field in the struct that
// contains an ,inline map, or -1 if there's none.
InlineMap int
}
type fieldInfo struct {
Key string
Num int
OmitEmpty bool
Flow bool
// Inline holds the field index if the field is part of an inlined struct.
Inline []int
}
var structMap = make(map[reflect.Type]*structInfo)
var fieldMapMutex sync.RWMutex
func getStructInfo(st reflect.Type) (*structInfo, error) {
fieldMapMutex.RLock()
sinfo, found := structMap[st]
fieldMapMutex.RUnlock()
if found {
return sinfo, nil
}
n := st.NumField()
fieldsMap := make(map[string]fieldInfo)
fieldsList := make([]fieldInfo, 0, n)
inlineMap := -1
for i := 0; i != n; i++ {
field := st.Field(i)
if field.PkgPath != "" {
continue // Private field
}
info := fieldInfo{Num: i}
tag := field.Tag.Get("yaml")
if tag == "" && strings.Index(string(field.Tag), ":") < 0 {
tag = string(field.Tag)
}
if tag == "-" {
continue
}
inline := false
fields := strings.Split(tag, ",")
if len(fields) > 1 {
for _, flag := range fields[1:] {
switch flag {
case "omitempty":
info.OmitEmpty = true
case "flow":
info.Flow = true
case "inline":
inline = true
default:
return nil, errors.New(fmt.Sprintf("Unsupported flag %q in tag %q of type %s", flag, tag, st))
}
}
tag = fields[0]
}
if inline {
switch field.Type.Kind() {
case reflect.Map:
if inlineMap >= 0 {
return nil, errors.New("Multiple ,inline maps in struct " + st.String())
}
if field.Type.Key() != reflect.TypeOf("") {
return nil, errors.New("Option ,inline needs a map with string keys in struct " + st.String())
}
inlineMap = info.Num
case reflect.Struct:
sinfo, err := getStructInfo(field.Type)
if err != nil {
return nil, err
}
for _, finfo := range sinfo.FieldsList {
if _, found := fieldsMap[finfo.Key]; found {
msg := "Duplicated key '" + finfo.Key + "' in struct " + st.String()
return nil, errors.New(msg)
}
if finfo.Inline == nil {
finfo.Inline = []int{i, finfo.Num}
} else {
finfo.Inline = append([]int{i}, finfo.Inline...)
}
fieldsMap[finfo.Key] = finfo
fieldsList = append(fieldsList, finfo)
}
default:
//return nil, errors.New("Option ,inline needs a struct value or map field")
return nil, errors.New("Option ,inline needs a struct value field")
}
continue
}
if tag != "" {
info.Key = tag
} else {
info.Key = strings.ToLower(field.Name)
}
if _, found = fieldsMap[info.Key]; found {
msg := "Duplicated key '" + info.Key + "' in struct " + st.String()
return nil, errors.New(msg)
}
fieldsList = append(fieldsList, info)
fieldsMap[info.Key] = info
}
sinfo = &structInfo{fieldsMap, fieldsList, inlineMap}
fieldMapMutex.Lock()
structMap[st] = sinfo
fieldMapMutex.Unlock()
return sinfo, nil
}
func isZero(v reflect.Value) bool {
switch v.Kind() {
case reflect.String:
return len(v.String()) == 0
case reflect.Interface, reflect.Ptr:
return v.IsNil()
case reflect.Slice:
return v.Len() == 0
case reflect.Map:
return v.Len() == 0
case reflect.Int, reflect.Int8, reflect.Int16, reflect.Int32, reflect.Int64:
return v.Int() == 0
case reflect.Float32, reflect.Float64:
return v.Float() == 0
case reflect.Uint, reflect.Uint8, reflect.Uint16, reflect.Uint32, reflect.Uint64, reflect.Uintptr:
return v.Uint() == 0
case reflect.Bool:
return !v.Bool()
case reflect.Struct:
vt := v.Type()
for i := v.NumField() - 1; i >= 0; i-- {
if vt.Field(i).PkgPath != "" {
continue // Private field
}
if !isZero(v.Field(i)) {
return false
}
}
return true
}
return false
}

716
vendor/gopkg.in/yaml.v2/yamlh.go generated vendored Normal file
View file

File diff suppressed because it is too large Load diff

173
vendor/gopkg.in/yaml.v2/yamlprivateh.go generated vendored Normal file
View file

@ -0,0 +1,173 @@
package yaml
const (
// The size of the input raw buffer.
input_raw_buffer_size = 512
// The size of the input buffer.
// It should be possible to decode the whole raw buffer.
input_buffer_size = input_raw_buffer_size * 3
// The size of the output buffer.
output_buffer_size = 128
// The size of the output raw buffer.
// It should be possible to encode the whole output buffer.
output_raw_buffer_size = (output_buffer_size*2 + 2)
// The size of other stacks and queues.
initial_stack_size = 16
initial_queue_size = 16
initial_string_size = 16
)
// Check if the character at the specified position is an alphabetical
// character, a digit, '_', or '-'.
func is_alpha(b []byte, i int) bool {
return b[i] >= '0' && b[i] <= '9' || b[i] >= 'A' && b[i] <= 'Z' || b[i] >= 'a' && b[i] <= 'z' || b[i] == '_' || b[i] == '-'
}
// Check if the character at the specified position is a digit.
func is_digit(b []byte, i int) bool {
return b[i] >= '0' && b[i] <= '9'
}
// Get the value of a digit.
func as_digit(b []byte, i int) int {
return int(b[i]) - '0'
}
// Check if the character at the specified position is a hex-digit.
func is_hex(b []byte, i int) bool {
return b[i] >= '0' && b[i] <= '9' || b[i] >= 'A' && b[i] <= 'F' || b[i] >= 'a' && b[i] <= 'f'
}
// Get the value of a hex-digit.
func as_hex(b []byte, i int) int {
bi := b[i]
if bi >= 'A' && bi <= 'F' {
return int(bi) - 'A' + 10
}
if bi >= 'a' && bi <= 'f' {
return int(bi) - 'a' + 10
}
return int(bi) - '0'
}
// Check if the character is ASCII.
func is_ascii(b []byte, i int) bool {
return b[i] <= 0x7F
}
// Check if the character at the start of the buffer can be printed unescaped.
func is_printable(b []byte, i int) bool {
return ((b[i] == 0x0A) || // . == #x0A
(b[i] >= 0x20 && b[i] <= 0x7E) || // #x20 <= . <= #x7E
(b[i] == 0xC2 && b[i+1] >= 0xA0) || // #0xA0 <= . <= #xD7FF
(b[i] > 0xC2 && b[i] < 0xED) ||
(b[i] == 0xED && b[i+1] < 0xA0) ||
(b[i] == 0xEE) ||
(b[i] == 0xEF && // #xE000 <= . <= #xFFFD
!(b[i+1] == 0xBB && b[i+2] == 0xBF) && // && . != #xFEFF
!(b[i+1] == 0xBF && (b[i+2] == 0xBE || b[i+2] == 0xBF))))
}
// Check if the character at the specified position is NUL.
func is_z(b []byte, i int) bool {
return b[i] == 0x00
}
// Check if the beginning of the buffer is a BOM.
func is_bom(b []byte, i int) bool {
return b[0] == 0xEF && b[1] == 0xBB && b[2] == 0xBF
}
// Check if the character at the specified position is space.
func is_space(b []byte, i int) bool {
return b[i] == ' '
}
// Check if the character at the specified position is tab.
func is_tab(b []byte, i int) bool {
return b[i] == '\t'
}
// Check if the character at the specified position is blank (space or tab).
func is_blank(b []byte, i int) bool {
//return is_space(b, i) || is_tab(b, i)
return b[i] == ' ' || b[i] == '\t'
}
// Check if the character at the specified position is a line break.
func is_break(b []byte, i int) bool {
return (b[i] == '\r' || // CR (#xD)
b[i] == '\n' || // LF (#xA)
b[i] == 0xC2 && b[i+1] == 0x85 || // NEL (#x85)
b[i] == 0xE2 && b[i+1] == 0x80 && b[i+2] == 0xA8 || // LS (#x2028)
b[i] == 0xE2 && b[i+1] == 0x80 && b[i+2] == 0xA9) // PS (#x2029)
}
func is_crlf(b []byte, i int) bool {
return b[i] == '\r' && b[i+1] == '\n'
}
// Check if the character is a line break or NUL.
func is_breakz(b []byte, i int) bool {
//return is_break(b, i) || is_z(b, i)
return ( // is_break:
b[i] == '\r' || // CR (#xD)
b[i] == '\n' || // LF (#xA)
b[i] == 0xC2 && b[i+1] == 0x85 || // NEL (#x85)
b[i] == 0xE2 && b[i+1] == 0x80 && b[i+2] == 0xA8 || // LS (#x2028)
b[i] == 0xE2 && b[i+1] == 0x80 && b[i+2] == 0xA9 || // PS (#x2029)
// is_z:
b[i] == 0)
}
// Check if the character is a line break, space, or NUL.
func is_spacez(b []byte, i int) bool {
//return is_space(b, i) || is_breakz(b, i)
return ( // is_space:
b[i] == ' ' ||
// is_breakz:
b[i] == '\r' || // CR (#xD)
b[i] == '\n' || // LF (#xA)
b[i] == 0xC2 && b[i+1] == 0x85 || // NEL (#x85)
b[i] == 0xE2 && b[i+1] == 0x80 && b[i+2] == 0xA8 || // LS (#x2028)
b[i] == 0xE2 && b[i+1] == 0x80 && b[i+2] == 0xA9 || // PS (#x2029)
b[i] == 0)
}
// Check if the character is a line break, space, tab, or NUL.
func is_blankz(b []byte, i int) bool {
//return is_blank(b, i) || is_breakz(b, i)
return ( // is_blank:
b[i] == ' ' || b[i] == '\t' ||
// is_breakz:
b[i] == '\r' || // CR (#xD)
b[i] == '\n' || // LF (#xA)
b[i] == 0xC2 && b[i+1] == 0x85 || // NEL (#x85)
b[i] == 0xE2 && b[i+1] == 0x80 && b[i+2] == 0xA8 || // LS (#x2028)
b[i] == 0xE2 && b[i+1] == 0x80 && b[i+2] == 0xA9 || // PS (#x2029)
b[i] == 0)
}
// Determine the width of the character.
func width(b byte) int {
// Don't replace these by a switch without first
// confirming that it is being inlined.
if b&0x80 == 0x00 {
return 1
}
if b&0xE0 == 0xC0 {
return 2
}
if b&0xF0 == 0xE0 {
return 3
}
if b&0xF8 == 0xF0 {
return 4
}
return 0
}